ZXY1450 Automatic Die cutting and Creasing machine
Description:
1. ZXY1450 is a special equipment applying to die cutting and
creasing advanced colorful boxes and cartons.
2. The machine combines several advantages over many other
die-cutters both at home and abroad.
3. Gripper bars with high intensity are applicable to all kinds of
cardboard, paperboard and corrugated paper.
4. Frontal, back and side registration mechanism ensures great
precision of die-cutting.
5. Other parts are adopted such as intermittent mechanism with high
precision, air clutch, pneumatic locking mechanism, programmable
controller and man-machine interface.
6. The interface can display various digital information of machine
such as working speed, amount of paper processed, total running
time, etc.
7. It is easy to eliminate troubles according to the display of
trouble shooting. Transducer is adopted to control the main motor
in achieving stepless speed variation.
8. The machine has a lot of sensors and safety-ensuring devices to
guarantee the safety of operator and the environment.
9. Frontal and back pressure can be adjusted separately.
10. It is convenient to stop the machine by handy.
11. It can also realize die-cutting without clipper margin.
Parts Introduction:
1. Big Turning Pneumatic Clutch:
The big turning pneumatic clutch responds the speed quickly, the
dint is big, and usually need not maintenant, making started, nasty
stopped, ordered to move, act accurately.
2. Align Paper Device:
Horizontal and lengthways can automatic align paper, accept the
tidy and easy to row in paper discard.
3. Automatic Feeding Paper:
It is special design of the bottom feeding device making tile paper
transported fast and accurately without any error, defends the
paper design and avoids rowing the paper surface.
4. Crankshaft:
The main driving system adopts worm wheel and worm gear pair and
special crank shaft linkage mechanism connected by bearing shell
which can reduce locomotive gap, avoid the crush of worm and worm
gear and ensure the running speed. Pressure of die-cutting is high
and able to be kept in high spot. The worm gear adopts the casting
tin bronze to ensure long working hours and low abrasion.
5. Electrical Control Part:
Computer control is adopted which can keep paper's feeding,
transferring, die cutting and delivery in an automatic control and
real-time detection. Man-machine interface indicating system will
show machine's working state, trouble's position and its solution.
There are various safety guarding devices that when accident
occurs, it will give an alarm by sound and light and shut-down
automatically to protect the safety of man and the machine.
6. Die-cutting Part:
The active-rotating system is with strong pressure and long working
hours after special design and optimized treatment. The
central-position system and plate turning structure provide great
convenience to operate. Broad nail is adopted for registration and
the down steel plate adopts air-switch, which make it easy to
install and remove.
Parameters:
Diectting Style | Even to flatten (bottom moving, top not) |
Max Paper Size | 1500*1100 mm |
Min Paper Size | 700*680 mm |
Max Die-cutting Size | 1490*1090 mm |
Max Die-cutting Pressure | 300T |
Paper Processed | Cardboard 1-8 mm |
Max Speed | 4500 sheets/hour |
Max Feeding Pile Height | 1400 mm (above the level) |
Max Delivery Pile Height | 1200 mm |
Total Power | 11 kw |
Total Power | 20 kw |
Weight | 16 T |
Dimensions | 7380*3890*2200 mm |
